ECO PREMIUM 2600

- Production: Up to 2,800 bricks a day (8 hours) without interruption of the equipment, one unit per operation;

- Heated Matrix (MA): Developed specifically to meet the physical aspects of the bricks in very humid areas, or where the soil is clayey, improving the finish of the bricks, giving them sharp edges, smooth walls, facilitating their removal;

- Operating system manufacture bricks: it is designed to use only one operator, who will make the manual loading, hydraulic pressing and removal of the brick in successive and constant operations, increasing the production of the machine;

- Manual download: It is simple to operate, it slides on the lower and upper steel treated nylon material which is self-lubricating, with low friction coefficient that allows silent and light mechanical movements, extending useful life with little physical effort in transporting and loading the compound to be pressed in the mold box;

 

- Hydraulic pressing operation: An operation for double action that presses and pulls the bricks. The combined hydraulic system mechanically lifts the bricks to the hand of the operator to be removed, increasing the productivity of the equipment.

- Compression(Hydraulic Power Nominal): up to 6 (six) tons;

NOTE: The height of the brick is the only variable size. It is subject to the characteristics of the soil and its moisture content. When the soil is more clayey or with high moisture, directly influences the brick’s height that can be reduced, indicating an excellent compression. However, to always keep the standard height, the operator will perform a simple adjustment to the machine, making the brick’s height millimeter.

- Quantidade de tijolos por m²:   53 tijolos – 25 x 12,5 x 7,5 cm de altura; 57 tijolos – 25 x 12,5 x 7 cm de altura; 64 tijolos – 25 x 12,5 x 6,25 cm de altura;

- Bricks’ models: The top matrix models, bottom and die cast box to brick modular plug finished apparent on both sides, escort the standard machine equipment. Due to the equipments’ versatility we have optional kits of model matrix, according to the following model lines:

Line of modular brick: Modular brick, half brick, channel brick with or without holes, brick column and solid brick. (Have your questions answered on the link “bricks”).

Line f bricks that fit on all four sides: This line has the same models of the lines modular and rail, but we emphasize that for these modes it is necessary to change the model matrix in the model box;

Line of bricks one sooth side and the other apparent: Available to any line of bricks. (Have your questions answered on the link “bricks”);

Line of bricks smooth on the two sides: Available to any line of bricks. (Have your questions answered on the link “bricks”);

Several lines: The equipment fits to new models of bricks and floors, not needing to change it. Consult our Technical Department to check this viability.

Floor line: Rectangular pattern, in many options of heights, with many figures in relief on the apparent surface. It may be round, smooth, beaded, or with designs that were approved by our Technical and Engineering Departments. The floor line requires the change of the model matrix in the model box. (Have your questions answered on the link “bricks”)

- Model Matrix: Made of nodular cast iron, which is known for its ductility, with the advantage of its high elasticity model and mechanic resistance, in combination with the resistance to corrosion and abrasion, it easily slips. They are produced with millimeter precision, interchangeable and with a fast change.

Table of command:

The push button on-off, consistent with the power and the engine voltage and temperature control of heated matrix. (MA)

- Electric controls: Designed to meet the electric components of power 5 HP (3.68 kWatt), voltage 220 volts, three-phased, and frequency 60 hz (for other voltages and parameters, please consult us in advance).it has temperature controller with timer to dive the heated matrix top an bottom, each time using one, a pair of electric heaters, cartridge type, placed at the base of the arrays to obtain a good distribution of heat through the insulated wires of nickel fibers glass. The engine is driven using a buttonhole provided with security system of interlocked contactor circuits.

- Enhanced design: Made in profiles and special steel plates (treated or untreated), designed and sizes for each function required, consisting of a base giving enhanced robustness to the structure by fully integrating it to the master columns.

- Fixing system: Composed of galvanized bolts and self locking nuts.

- Security sign: All moving parts receive reflective stickers with the necessary safety instructions.

- System of welding: High penetration and resistance MIG, operated by qualified and experienced professionals.

- Dimensions of the equipment to work: Width 0.98 m, length 1.49 m, height 1.97 m.

- Dimensions of the equipment packed for shipment: Width 1.05 m, length 0.95 m, height 1.85 m, volume 1,875 cubic meters.

- Optional: Manual transport kit: It facilitates the movement of equipment in the factory yard or construction site. Consisting of 3 (three) sets interchangeable , 2 (two) sets of shaft end complete with alloy wheels of tires, set laterally to the chassis and 1 (one) all set in the rear of the chassis with handlers for the hands, lifting the machine, transporting and placing it in a more convenient way.

Eco Máquinas reserves the rights to change prices, products and content without notice.