MEET THE ADVANTAGES OF HAVING A COMPLETE HYDRAULIC TRACK PRESS, READING ATTENTIVELY THE TECHNICAL SPECIFICATIONS OF THE PRODUCT:

- Production Load: Up to 3.500 bricks a day (8 hours), uninterrupted equipment, one unit per operation;

- Hydraulic loading (CH): Allows agility in the loader, which is moved by a hydraulic piston giving precision cycle loading compost to be pressed in the mold. Slides on the lower steel track guides and upper nylon, this material is self-lubricating, with low coefficient of friction, allowing light and silent mechanical movements, and increasing the useful life.

- Heated Matrix (MA): Especially developed to attend the physical aspects of the bricks in very humid regions, where the soil is clay, improving the bricks, giving them edges and smooth walls, facilitating its removal.

- Operation system manufacturing bricks: It was made to use only one operator that will perform the hydraulic loading, the hydraulic press and the brick removal in successive and constant operations, increasing the machine’s production.

- Compression: (Nominal Hydraulic Power): Up to 6 tons.

- Bricks measurements: 30 cm length, 15 cm width and up to 7.5 cm height.

NOTE: The brick’s height is the only variable measurement. It depends on the characteristics of the soil and its humidity. The soil which is more clayey or with high level of humidity, directly influences the brick’s height, that can be reduced, which indicates excellent pressing. However, in order to always keep a pattern height, the operator will do a simple regulation in the machine, making the brick’s height millimeter.

- Quantity of bricks per square meter: 44.5 bricks – 30 X 15 X 7.5 cm height 47.6 bricks – 30 X 15 X 7 cm height 53.4 bricks – 30 X 15 X 6.25 height

- Bricks’ models: The top matrix models, bottom and die cast box to brick modular plug finished apparent on both sides, escort the standard machine equipment. Due to the equipments’ versatility we have optional kits of model matrix, according to the following model lines:

Line of modular brick: Modular brick, half brick, channel brick with or without holes, brick column and solid brick. (Have your questions answered on the link “bricks”)

Brick rail line: Intermediate inferior superior, half brick, and channel brick with or without holes, column brick, and solid brick. For a good finish on the corners of walls, we recommend brick corner right and left. (Have your questions answered on the link “bricks”).

Line f bricks that fit on all four sides: This line has the same models of the lines modular and rail, but we emphasize that for these modes it is necessary to change the model matrix in the model box.

Line of bricks one sooth side and the other apparent: Available to any line of bricks. (Have your questions answered on the link “bricks”).

Line of bricks smooth on the two sides: Available to any line of bricks. (Have your questions answered on the link “bricks”).

Several lines: The equipment fits to new models of bricks and floors, not needing to change it. Consult our Technical Department to check this viability.

Floor line: Rectangular pattern, in many options of heights, with many figures in relief on the apparent surface. It may be round, smooth, beaded, or with designs that were approved by our Technical and Engineering Departments. The floor line requires the change of the model matrix in the model box. (Have your questions answered on the link “bricks”).

- Model Matrix: Made of nodular cast iron, which is known for its ductility, with the advantage of its high elasticity model and mechanic resistance, in combination with the resistance to corrosion and abrasion, it easily slips. They are produced with millimeter precision, interchangeable and with a fast change.

- Fixing system: Composed of galvanized bolts and self locking nuts.

- Security sing: All moving parts receive reflective stickers with the necessary safety instructions.

- System of welding: High penetration and resistance MIG, operated by qualified and experienced professionals.

- Dimensions of the equipment to work: Width 0.98 m, length 1.49 m, height 1.97 m.

- Dimensions of the equipment packed for shipment: Width 1.05 m, length 0.95 m, height 1.85 m, volume 1,875 cubic meters.

- Optional: Manual transport kit: It facilitates the movement of equipment in the factory yard or construction site. Consisting of 3 (three) sets interchangeable , 2 (two) sets of shaft end complete with alloy wheels of tires, set laterally to the chassis and 1 (one) all set in the rear of the chassis with handlers for the hands, lifting the machine, transporting and placing it in a more convenient way.

If you have any questions, get in touch with the Commercial Department through the e-mail: comercial@ecomaquinas.com.br

Eco Máquinas reserves the rights to change prices, products and content without notice.